This kit comes with everything you need to replace your Current Bed Support Rodends
2- 3/8" NF RH Rodend
2- 3/8" NF LH Rodend
2- 3/8 NF RH Nuts
2- 3/8 NF LH Nuts

NOTE:
For Extreme Weather Conditions we recommend to coat the rod ends with a clear coat paint and Anti-Seize the threads. '
At Check Out Use flat rate envelope for shipping

Install two lights directed towards the rear and two lights aimed at the curb. Baja Designs S1/S2 lights are highly recommended for optimal fitment. The rear driver bracket includes a mount for an air disconnect. 3/16 inch hot rolled material finished with a black powder coat. USA Made. usa madd.

Install two lights directed towards the rear and two lights aimed at the curb. Baja Designs S1/S2 lights are highly recommended for optimal fitment. The rear driver bracket includes a mount for an air disconnect. 3/16 inch hot rolled material finished with a black powder coat. USA Made.

raptor bedsupports, gen1 bedsupports,

ford superduty bed supports

Bed Supports Raptor

Coming Soon!

Mount 7- XL80,LP4 or equivalent size lights. Custom Light spacing can be added . The Light Bar Bolts on using the factory bumper bolt locations.Factory Plastic will have to be trimmed for the Light Bar mounts.

1 3/4" DOM tubing, 3 hole Light mounts and Tig welded. Comes Powdered Coated Semi Gloss Black and Hardware. Works with and without the factory warn winch mount. Does Not Interfere with Adaptive Cruise Control. Follows the lines of the Factory Bumper. Made in house.

No Drill. Bolt Together tent rack uses the factory box cleats and top bed rail to support the rack and Bed Tent. Multiple Baja trips and testing was done with Jeremiah @ EXO.

Made from 3/16" P&O steel. The Rack bolts together for an easy 45 min install. Powder Coat and all hardware included.

Note: When using the rack, Builtright or similar Bed panels need to be trimmed.

Bed Supports are Highly recommend when using the Bed Tent Rack!